“

How to change IP address & Set up Wireless Adapter in Kali Linux

To change the IP address and set up a wireless adapter in Kali Linux, you can follow these steps:

1. Open the terminal and type "ifconfig" command to check the current IP address.

2. To change the IP address, type the following command:
ifconfig netmask
Replace with the name of the interface you want to configure (such as eth0 or wlan0), with the new IP address you want to use, and with the subnet mask for your network.

3. To set up a wireless adapter, type the following command:
iwconfig essid key
Replace with the name of your wireless adapter (such as wlan0), with the name of the wireless network you want to connect to, and with the password for the network.

4. After you have entered these commands, you can use the ping command to test your network connection.
For example, you can type: ping google.com to see if you can access the internet.

5. If you want to make these changes permanent, you can edit the network configuration files located in the /etc/network/ directory.
For example, to configure a static IP address for your Ethernet adapter, you can edit the /etc/network/interfaces file and add the following lines:

auto eth0
iface eth0 inet static
address
netmask
gateway

Replace <new-ip-address> with the new IP address you want to use, subnet-mask with the subnet mask for your network, and gateway-address with the IP address of your network gateway.
Save the file and restart the networking service using the following command:
service networking restart

These steps should allow you to change the IP address and set up a wireless adapter in Kali Linux.

“

How to change IP address & Set up Wireless Adapter in Kali Linux